【SAFER USE FOR HOME Power : 3000
W; Capacity : 1500g/3.3lb; Grinding Degree : 50-300 Mesh (vary from different materials); Rotating Speed : 36000
R/Min; Control method : Timer Switch (without coarse/fine control; Do not continuously operate the mill for more than 3 minutes.).Committed to provide high quality products and considerate service, we always stand on the side of the customers.Moongiantgo is like a big family and every customer is one part of this big family.Each time seeing the users satisfaction and praise, our own happiness will emerge spontaneously.Every communication with users is our driving force to move forward every day.Materials ready for grinding must be dry.Wet, moisture or oil materials are not suitable to be ground into powder.Dry the materials as much as possible before grinding, and then grind it when it is completely cool.Recommend grinding capacity one time：the material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the jar.Do not fill the grinding jar to full otherwise it will cause overload.Recommend use time : no more than 3 minutes.General grains only need 30s to be ground into powder.If you are not satisfied with the grinding effect, you can sieve out the coarse particles and grind it again for finer powder.It need take 5-10 minutes to rest after every 3 minutes of work.Check the blade and the nut is loose or not before grinding.To ensure safety, the nut should be tightened before grinding.After long-term use, blades and carbon brushes need to be replaced if they are worn.Dont clean the grinding jar with the water directly.Use dried rag or brush to clean the machine.Due to brush motor, some sparks and brush frictional odor is normal when the first several uses, which will disappear after you use the machine some times later.You can Grind some Rice or Dried Tea first for several times to eliminate the odor.
